Yaskawa JAPMC-CM2304-E - Manual (Page 62)

4.2 EtherNet/IP Transmission Definition
4.2.8 Module Information Tab Page
4-16
4.2.8 Module Information Tab Page
The Module Information tab page displays the information of the EtherNet/IP Module (local station)
On this tab page, setting is not possible.
The following explains each item displayed on the Module Information tab page.
Module Status
Displays information that shows the current status of the local station.
The module status will be displayed in one of the five categories shown below.
• Operating normally
• Device not set
• Module error (unrecoverable)
• Module error (recoverable)
• Self-testing
Network Status
Displays the current status of the EtherNet/IP network.
The network status will be displayed in one of the five categories shown below.
• Operating normally
• No I/O allocations or connection being established
• IP duplicated
• Communication timeout
• Self-testing
IP Address
Displays the IP address of the local station.
Serial Number
Displays the serial number of EtherNet/IP.
Revision
Displays the revision number of EtherNet/IP.
1
2
4
5
3
1
2
3
4
5