Yaskawa JAPMC-CM2304-E - Manual (Page 61)

4.2 EtherNet/IP Transmission Definition
4.2.7 Status Detail Window
4-15
4
EtherNet/IP
T
ransmission
Definition
( 2 ) Status Code Table
The following table lists the status codes and their details.
Œ If the status code is “4003H,” more details are displayed in the General Status and Extended Status fields. For
details of the code displayed in these fields, refer to A.1 General Status Code Table on page A-2 and A.2 Extended
Status Code Table on page A-3.
Status Code Contents Description
0000H Waiting I/O communication has not been started.
8000H I/O communication normal I/O communication is being correctly performed.
4001H Connection error Connection to the target failed.
4002H Connection timeout
Although connection to the target was successful, no response for the
ForwardOpen service was returned.
4003H
Error details returned from
the target Although connection to the target was successful, an error response was
received for the ForwardOpen service.
4004H Connection shutoff Timeout was detected while establishing the connection
4005H Request send error Sending the request to the specified path failed.
4006H Request timeout
No response was returned for the request.
(After establishing the session)
4007H Memory error Failed to secure memory.
4008H Socket error An error occurred with the socket function.
4009H Session number error The number of sessions exceeded the limit.
400AH Connection number error The number of connections exceeded the limit.
400BH Request number error The number of requests exceeded the limit.
400CH Request receiving error
The device is not in response receivable status, or the request
transmission target remote station does not exist.