4 connection specifications, 1 connector specifications, 2 cable specifications – Yaskawa JAPMC-CM2304-E User Manual
Page 28
2.4 Connection Specifications
2.4.1 Connector Specifications
2-12
2.4 Connection Specifications
2.4.1 Connector Specifications
This section explains the connector specifications for the 263IF-01 Module.
( 1 ) Connector Specifications
( 2 ) Connector Pin Arrangement
The connector is used to connect the 263IF-01 Module to the devices in the EtherNet/IP network via an EtherNet/IP
connection.
2.4.2 Cable Specifications
Yaskawa does not provide EtherNet/IP cables. Obtain commercially available category 5 cross or straight cables.
The AUTO MDI/MDI-X function of the 263IF-01 Module automatically distinguishes between cross and straight
cables.
Connector
Shape
Name
Connector
Name
No. of
Pins
Connector Model
Module Cable
Manufacturer
EtherNet/IP
EtherNet/IP
8
JOG-0001NL
(LED/Pulse transformer
built-in modular jack)
–
Pulse Engineering
LINK
100M
EtherNet/IP
Pin
Number
Signal Name
I/O
Description
1
TXD+
O
Send data +side
2
TXD-
O
Send data -side
3
RXD+
I
Receive data +side
4
–
–
–
5
–
–
–
6
RXD-
I
Receive data -side
7
–
–
–
8
–
–
–
LINK
100M
EtherNet/IP