Yaskawa JAPMC-CM2304-E - Manual (Page 45)

3.5 Starting the MPE720, and Setting Communication or Network Parameters
3.5.2 Starting MPE720 Ver. 5.xx and Setting Network Parameters
3-17
3
Mounting and Starting the Module
3.
Click the Network tab and select Yes for OnLine.
Fields will be displayed for the logical port number, unit number, and route so that they can be set.
4.
For Logical Port No. (Device Type), select the logical port number to be used from the logical port
numbers that were set with the Communication Manager.
The contents display on the tab page may change depending on the port that is selected.
Enter the IP address of the personal computer, and click the OK button.