SMA SMC 6000TL Installation - Manual (Page 10)

Safety SMA Solar Technology AG
10 SMC6-8TL-IEN101040 Installation Guide
When designing the PV system, ensure that the values comply with the permitted operating range of
all components at all times. The free design program "Sunny Design" (www.SMA.de/en/
SunnyDesign) will assist you. The manufacturer of the PV modules must have approved the modules
for use with this Sunny Mini Central unit. You must also ensure that all measures recommended by the
module manufacturer for long-term maintenance of the module properties are taken (see also
Technical Information "Module Technology", in the download area of www.SMA.de/en).
Do not use the inverter for purposes other than those described here. Alternative uses, modifications
to the inverter or the installation of components not expressly recommended or sold by SMA Solar
Technology AG void the warranty claims and operation permission.
Certified Countries
The Sunny Mini Central 6000TL / 7000TL / 8000TL (with according configuration) fulfill the
requirements specified in the following standards and directives (dated: March/2010):
• VDE 0162-1-1 (02.2006)
• C10/C11 (05.2009) *
• PPDS
• PPC (02.2006)
• RD 1663/2000 (2000) **
• SS-EN 50438
• AS4777 (2005)
• IEC utility Meeting 216
• DK 5940 Ed. 2.2 (02.2006) (only applies to SMC 6000TL-IT / 7000TL-IT / 8000TL-IT)
• Kepco guide (02.2006) (only applies to SMC 8000TL-KR)
* Only possible when the phase voltage is 220 V.
** In the event of restrictions in certain regions, contact the SMA Serviceline
SMA Solar Technology AG can preset special grid parameters for other countries / installation
locations according to customer requests, after evaluation by SMA Solar Technology AG. You can
make later modifications yourself by changing software parameters with respective communication
products (e.g. Sunny Data Control or Sunny Explorer) (see section 5.7 ”Setting the Grid and Country
Parameters” (page 45)). To change grid-relevant parameters, you need a personal access code - the
so-called SMA Grid Guard Code. The application form for the personal access code is located in the
download area at www.SMA.de/en, in the "Certificate" category for each inverter.