SMA Sunny Boy Control Light - Manual (Page 45)

Sunny Boy Control Light Chapter 5: Menu Functions for Configuration
SUNBCL-11:NE
- 45 -
SMA Regelsysteme GmbH
[ EXT. DISPLAY ]
‡Interface
COM2:PC
Type Š
EnergieCom
----------------
„configure
Fig. 5.14: External display “EnergieCom”
Configuration
The line selected with the cursor additionally shows the selected device and the
measured channels. Dot on the left indicates if the display is activated or not (dot =
selected; no dot = not selected).
[ DISPLAY-NO. ]
¯„Display 01
ˆ¯„SC:E-Total
¯„Display 03 Š
¯„Display 04
¯„Display 05
¯„Display 06
„Display 07
„Display 99
Fig. 5.15: Overview of the 99 possible displays
[ENTER] confirms the selection and displays an overview of the defined parameters.
Overview of the defined parameters
This sub-menu shows all settings of the selected display.
[ DISAPLAY 06 ]
Dev.:Channel
ˆ SC:E-today
Format 06.2
Fig. 5.16: Display settings
The numeric format can be edited in the bottom line.