SMA Sunny Boy Control Light - Manual (Page 16)

Sunny Boy Control Light Chapter 2: Commissioning the Sunny Boy Control Light
SUNBCL-11:NE
- 16 -
SMA Regelsysteme GmbH
Choose the language with the
[[[[↑↑↑↑]]]]
and
[[[[↓↓↓↓]]]]
keys. Confirm your selection with
[[[[
Enter
]]]]
.
After confirming, the selection arrow in front of the selected language blinks. The
selection must be confirmed once again ([Enter] key) in order to save the current
setting or can be cancelled with the [Esc] key. You may exit the dialog with the [Esc]
key.
2.2.2 Setting Date and Time
[ DATE/TIME ]
ˆ MM.DD.YYYY
hh:mm: h
Fig. 2.5: Date / Time setting
Now you may adjust the clock of the Sunny Boy Control Light. The
[[[[↑↑↑↑]]]]
and
[[[[↓↓↓↓]]]]
keys
allow the selection of date or time. Input is possible after pressing
[[[[
Enter
]]]]
. Every digit
can be set separately in the sequence day, month, year resp. hours and minutes with
the
[[[[↑↑↑↑]]]]
and
[[[[↓↓↓↓]]]]
keys. The
[[[[
Enter
]]]]
key switches to the next input field. After the
rightmost digit has been entered, the selection arrow in front of the adjusted value will
start to blink. Now you can confirm the new setting by pressing
[[[[
Enter
]]]]
or cancel your
new settings with
[[[[
ESC
]]]]
. You can exit the dialog by pressing the key
[[[[
ESC
]]]]
.
2.2.3 Detection of Connected Devices
Usage of Powerline Transmission
Sunny Boy Sunny Boy Sunny Boy
mains 230 V / 50 Hz
Sunny Boy
Control Light
Fig. 2.6: Powerline Communication