Menu functions for configuration, Password, 5 menu functions for configuration – SMA Sunny Boy Control Light User Manual
Page 37: 1 password, Setup, System, Interfaces, Pv-plant, Controlling, Diagnosis
Sunny Boy Control Light
Chapter 5: Menu Functions for Configuration
SUNBCL-11:NE
- 37 -
SMA Regelsysteme GmbH
5 Menu Functions for Configuration
The "
Setup
Setup
Setup
Setup
" menu has all functions that exceed the normal operation of the Sunny
Boy Control Light.
Please note that the usage of the functions in the "
Setup
Setup
Setup
Setup
" menu can have
influence on the operational safety and the operation of the entire plant.
Use this menu carefully.
5.1 Password
The passwords for the Sunny Boy Control Light are on a separate sheet that was
shipped together with your "User Manual". The password level is automatically set to
"No Password" level
•
at 00:00 h
•
after a system reset or a restart
•
or after entering a wrong password of none at all
The "Installer" password lets you change the operating parameters of the
Sunny Boy Inverters - THIS CAN INVALIDATE THE OPERATING
PERMISSION OF YOUR PV-PLANT. Use this parameter carefully.
The "User" password gives access to several sub-menus in the
[SETUP]
menu:
[ SETUP ]
Password
ß
Locks ‘SETUP’ menu
Chap. 5
System
ß
Language Date and Time
Chap. 5.2
Interfaces
ß
Interface Configuration
Chap. 5.3
PV-Plant
ß
device registration, detection, parameter, energy-offset
Chap. 5.4
Controlling
ß
Thresholds, Signaling and Switching Contacts, Fax Info
Chap. 5.5
Diagnosis
ß
Reports, Communication Test
Chap. 5.6
Fig. 5.1: Setup Menu