Working with the sunny boy control light, Display on power-up, 4 working with the sunny boy control light – SMA Sunny Boy Control Light User Manual

Page 29: 1 display on power-up, Sunny boy, Control light, Software v2.xx, Date/time, Hh:mm

Sunny Boy Control Light

Chapter 4: Working with the Sunny Boy Control Light

SUNBCL-11:NE

- 29 -

SMA Regelsysteme GmbH

4 Working with the Sunny Boy Control Light

4.1 Display on Power-Up

The Sunny Boy Control Light executes an automatic self-test at every start. On

error during this self-test, the according error or failure is indicated and - according to

system settings - an external signal is sent out or the beeper is activated. If no errors

are detected, the Sunny Boy Control Light will simply display its serial number and

software version.

[ SUNNY BOY ]

[CONTROL LIGHT ]

SerNoxxxxxxxxxx

SoftwareV2.xx

Fig. 4.1: Display on Power-Up

After this you have to input the date and time.

[ DATE/TIME ]

MM.DD.YYYY

hh:mm

Fig. 4.2: Date/Time settings

After completing the settings the Sunny Boy Control Light switches into Normal

Mode and starts

""""Online-Info

Online-Info

Online-Info""""