SMA STP 12000TL-US - Manual (Page 50)

Event number Message, cause and corrective measures
7102 Parameter file not found or defective
The parameter file was not found or is defective. The update failed. The in-
verter continues feeding power into the grid.
Corrective measures:
• Copy the parameter file to the correct folder again.
7110 No update file found
No update file has been found.
Corrective measures:
• Copy the update file to the memory card folder. Select the folder
\UPDATE.
7201 to 7202 Data stor. not poss.
Internal error. The inverter continues to feed into the utility grid.
Corrective measures:
• Contact the SMA Service Line.
7303 Update main CPU failed
The cause must be determined by the SMA Service Line.
Corrective measures:
• Contact the SMA Service Line.
7305 Update RS485I module failed
Update of RS485i module failed.
Corrective measures:
• Retry update.
• If the error recurs, contact the SMA Service Line.
7311 Update language table failed
Updating the language table failed.
Corrective measures:
• Retry update.
• If the error recurs, contact the SMA Service Line.
7316 Update Speedwire module failed
Updating the Speedwire module failed.
Corrective measures:
• Retry update.
• If the error recurs, contact the SMA Service Line.
7324 Wait for update conditions
The inverter has successfully completed the update and is waiting for sufficient
DC irradiation.
10 Troubleshooting SMA Solar Technology AG
Installation Manual STP12-24TL-US-IA-en-16 50