SMA STP 12000TL-US - Manual (Page 22)

Figure 4: Permitted and prohibited mounting positions:
5.2 Mounting the Inverter
Additionally required mounting material (not included in the scope of delivery):
☐ At least two screws suitable for the support surface (diameter: 10 mm at maximum)
☐ At least two washers that are suitable for the screws (diameter: 30 mm (1.8 in) at maximum)
☐ If necessary, two screw anchors suitable for the support surface and the screws
☐ For transporting the inverter with a crane: two eye bolts suitable for the weight of the inverter
(size: M10)
☐ To secure the inverter from being lifted off: two screws, washers and screw anchors that are
suitable for the support surface
5 Mounting SMA Solar Technology AG
Installation Manual STP12-24TL-US-IA-en-16 22