beautypg.com

Figure 10 assign device name, Figure 11 assign name, Figure 12 how to verify device name – HEIDENHAIN PROFINET User Manual

Page 26: Figure 11, Assign name, Figure 12, How to verify device name

background image

Configuration example

26

Choose the device on which the device name should be changed

and then click on the Assign name button to adopt the changes

and then click on the Close button. The MAC address of the en-

coder is written on the encoder label.

Figure 11

Assign name


Note: All connected devices need to be assigned a unique

device name.

After changing device name, it is recommended to verify that the

performed change has been done. This is done by opening the

Verify Device Name window found under PLC->Ethernet->Verify

Device Name.

Figure 12

How to verify device name

See also other documents in the category HEIDENHAIN Equipment: