HEIDENHAIN TNC 620 (73498x-02) ISO programming - Manual (Page 184)

Programming: Programming contours
6.4 Path contours - Cartesian coordinates
6
184
TNC 620 | User's Manual for DIN/ISO Programming | 5/2013
6.4 Path contours - Cartesian coordinates
Overview of path functions
Function Path function key Tool movement Required input Page
Straight line L Straight line Coordinates of the end
point of the straight line 185
Chamfer: CHF Chamfer between two
straight lines Chamfer side length 186
Circle center CC None Coordinates of the
circle center or pole 188
Circular arc C Circular arc around a
circle center CC to an
arc end point Coordinates of the arc
end point, direction of
rotation 189
Circular arc CR Circular arc with a
certain radius Coordinates of the arc
end point, arc radius,
direction of rotation 190
Kreisbogen CT Circular arc with
tangential connection
to the preceding and
subsequent contour
elements Coordinates of the arc
end point 192
Corner rounding
RND
Circular arc with
tangential connection
to the preceding and
subsequent contour
elements Rounding radius R 187
Programming path functions
You can program path functions conveniently by using the gray path
function keys. In further dialogs, you are prompted by the TNC to
make the required entries.
If you enter DIN/ISO functions via a connected USB
keyboard, make sure that capitalization is active.