Resetting the plane function – HEIDENHAIN iTNC 530 (60642x-03) ISO programming User Manual

Page 416

416

Programming: Multiple axis machining

12.2 The PLANE function: Tilting the w

ing plane (sof

e option 1)

Resetting the PLANE function



Show the soft-key row with special functions



Select special TNC functions: Press the SPECIAL TNC

FUNCT. soft key



Select the PLANE function: Press the TILT

MACHINING PLANE soft key: The TNC displays the
available definition possibilities in the soft-key row



Select the Reset function. This internally resets the

PLANE

function, but does not change the current axis

positions



Specify whether the TNC should automatically move

the rotary axes to the default setting (MOVE or TURN) or
not (STAY) (see "Automatic positioning:
MOVE/TURN/STAY (entry is mandatory)" on page
430).



Terminate the entry: Press the END key

Example: NC block

25 PLANE RESET MOVE SET-UP50 F1000

The PLANE RESET function resets the current PLANE
function—or an active cycle G80—completely (angles = 0
and function is inactive). It does not need to be defined
more than once.