HEIDENHAIN iTNC 530 (60642x-03) ISO programming - Manual (Page 368)

368 Programming: Special functions
1
1
.3 Fixt
ur
e monit
o
ri
ng (DCM
sof
tw
a
re
option)
Loading fixtures under program control
You can also activate and deactivate saved fixtures under program
control. Proceed as follows:
 Show the soft-key row with special functions
 Select PROGRAM SPECIFICATIONS group
 Scroll through the soft-key row
 Enter the path and file name of the stored fixture and
confirm with the ENT key, or open the file selection
dialog with the SELECTION WINDOW soft key in
order to select the stored fixture. The TNC displays a
preview in the selection dialog if you highlight a
stored fixture
Deactivating fixtures under program control
You can deactivate active fixtures under program control. Proceed as
follows:
 Show the soft-key row with special functions
 Select PROGRAM SPECIFICATIONS group
 Scroll through the soft-key row
 Select the reset function and confirm with the END
key
Stored fixtures are by default in the
TNC:\system\Fixture\Archive
directory.
Make sure that the fixture to be loaded has also been
saved with the active kinematics.
Make sure that no other chucking equipment is active
during automatic activation of a fixture. If necessary, make
prior use of the FIXTURE SELECTION RESET function.
You can also activate fixtures via the pallet tables in the
FIXTURE
column.