HEIDENHAIN TNC 320 (77185x-01) Cycle programming - Manual (Page 254)

Cycles: Coordinate Transformations
11.6 ROTATION (Cycle 10, DIN/ISO: G73)
11
254
TNC 320 | User's Manual Cycle Programming | 3/2014
Cycle parameters
Rotation: Enter the rotation angle in degrees (°).
Input range –360.000° to +360.000° (absolute or
incremental) NC blocks
12 CALL LBL 1
13 CYCL DEF 7.0 DATUM SHIFT
14 CYCL DEF 7.1 X+60
15 CYCL DEF 7.2 Y+40
16 CYCL DEF 10.0 ROTATION
17 CYCL DEF 10.1 ROT+35
18 CALL LBL 1