beautypg.com

Please note while programming – HEIDENHAIN TNC 320 (77185x-01) Cycle programming User Manual

Page 233

background image

FACE MILLING (Cycle 232, DIN/ISO: G232) 10.4

10

TNC 320 | User's Manual Cycle Programming | 3/2014

233

Please note while programming:

Enter the

2nd set-up clearance in Q204 so that no

collision with the workpiece or the fixtures can occur.

If the starting point in the 3rd axis Q227 and the
end point in the 3rd axis Q386 are entered as equal
values, the TNC does not run the cycle (depth = 0
has been programmed).

See also other documents in the category HEIDENHAIN Equipment: