HEIDENHAIN TNC 320 (340 55x-03) - Manual (Page 63)

HEIDENHAIN TNC 320 63
2.5 Tilting the W
o
rk
ing Plane (Sof
tw
ar
e Option 1)
Activating manual tilting
To select manual tilting, press the 3-D ROT soft key.
Use the arrow keys to move the highlight to the
Manual Operation
menu item.
Open the selection menu with the GOTO key and use
the arrow key to select the Active menu item;
confirm with the ENT key.
Use the arrow keys to position the highlight on the
desired rotary axis.
Enter the tilt angle or
Press the CONFIRM VALUE soft key to confirm the
current REF position of the active rotary axes.
To conclude entry, press the OK soft key.
To cancel the entry, press the CANCEL soft key.
To reset the tilting function, set the desired operating modes in the
menu “Tilt working plane” to inactive.
If the tilted working plane function is active and the TNC moves the
machine axes in accordance with the tilted axes, the status display
shows the
symbol.
If you activate the “Tilt working plane” function for the Program Run
operating mode, the tilt angle entered in the menu becomes active in
the first block of the part program. If you use Cycle 19 WORKING PLANE
in the machining program, the angle values defined there are in effect.
The TNC will then overwrite the angle values entered in the menu with
the values from Cycle 19.