HEIDENHAIN TNC 320 (340 55x-03) - Manual (Page 227)

HEIDENHAIN TNC 320 227
8.2 Cy
cles f
o
r Dr
illing, T
a
pping and Thr
ead Milling
 Angle for spindle orientation Q336 (absolute
value): Angle at which the TNC positions the tool
before it is plunged into or retracted from the bore
hole.
Danger of collision!
Check the position of the tool tip when you program a
spindle orientation to the angle that you enter in Q336 (for
example, in the Positioning with Manual Data Input mode
of operation). Set the angle so that the tool tip is parallel to
a coordinate axis. Select a disengaging direction in which
the tool moves away from the edge of the hole.