HEIDENHAIN TNC 320 (340 55x-03) - Manual (Page 338)

338 8 Programming: Cycles
8.7 Coor
dinat
e
T
ransf
or
mation Cy
cles
Selecting a datum table in the part program
With the SEL TABLE function you select the table from which the TNC
takes the datums:
 To select the functions for program call, press the
PGM CALL key.
 Press the DATUM TABLE soft key.
 Select the complete path name of the datum table or
the file with the SELECT soft key and confirm your
entry with the END key.
Edit the datum table in the Programming mode of operation.
Select the datum table in the Programming mode of operation.
 Press the PGM MGT key to call the file manager (See
“File Management: Fundamentals,” page 77).
 Display the datum tables: Press the soft keys SELECT
TYPE and SHOW .D.
 Select the desired table or enter a new file name.
 Edit the file. The soft-key row comprises the following
functions for editing:
Program a SEL TABLE block before Cycle 7 Datum Shift.
A datum table selected with SEL TABLE remains active until
you select another datum table with SEL TABLE.
Function Soft key
Select beginning of table
Select end of table
Go to previous page
Go to next page
Insert line (only possible at end of table)
Delete line
Find
Go to beginning of line
Go to end of line