HEIDENHAIN TNC 320 (340 55x-03) - Manual (Page 334)

334 8 Programming: Cycles
8.7 Coor
dinat
e
T
ransf
or
mation Cy
cles
8.7 Coordinate Transformation
Cycles
Overview
Once a contour has been programmed, you can position it on the
workpiece at various locations and in different sizes through the use
of coordinate transformations. The TNC provides the following
coordinate transformation cycles:
Cycle Soft key Page
7 DATUM SHIFT
For shifting contours directly within the
program or from datum tables 336
247 DATUM SETTING
Datum setting during program run 340
8 MIRROR IMAGE
Mirroring contours 341
10 ROTATION
For rotating contours in the working
plane 343
11 SCALING FACTOR
For increasing or reducing the size of
contours 344
26 AXIS-SPECIFIC SCALING FACTOR
For increasing or reducing the size of
contours with scaling factors for each
axis 345
19 WORKING PLANE
Machining in tilted coordinate system on
machines with swivel heads and/or rotary
tables 346