HEIDENHAIN ND 200 - Manual (Page 13)

ND 200 Installation Instructions
en
15
1 About these instructions
These instructions provide all the information and safety
precautions needed for the proper mounting and installation
of the product.
These instructions cover the products that are listed below.
When information applies only to a specific product, the
specific product name is shown.
1.1 Information on the model
Product designation ID number
ND 280 636280-01
ND 287 636287-01
ID label
The ID label is provided on the back of the ND.
Example:
ND xxxx QUADRA-CHEK
ID 123456-xx xx
SN 12 345 678 x
1
2
3
www.heidenhain.de
1 Product designation
2 Index
3 ID number
Validity of the documentation
A document number is provided at the bottom
left on the last page of the documentation. The
documentation is valid if the document number
matches the document number indicated at
www.heidenhain.de .
For this purpose, you need to compare
the product designation, the ID number
and the index given on the ID label with
the corresponding details provided at
www.heidenhain.de .
1.2 Notes on reading the documentation
The table below lists the components of the documentation
in the order of priority for reading.
WARNING
Failure to comply with the documentation may result in
fatal accidents, personal injury or damage to equipment.
Please read the documentation carefully from
beginning to end and keep it for future reference.
Documentation Description
Addendum An addendum supplements or su-
persedes the corresponding con-
tents of the Operating Instructions
and, if applicable, of the Installation
Instructions. If this document is in-
cluded in delivery, read it first befo-
re you proceed. All other contents
of the documentation retain their
validity.
Installation Instruc-
tions
The Installation Instructions con-
tain all the information and safety
precautions needed for the proper
mounting and installation of the pro-
duct. They are an excerpt from the
Operating Instructions and are in-
cluded in every delivery. This docu-
ment has the second highest priori-
ty for reading.
Operating Instruc-
tions
The Operating Instructions con-
tain all the information and safe-
ty precautions needed for the pro-
per operation of the product accor-
ding to its intended use. It is not
included in delivery and has the
third highest priority for reading.
It must be downloaded from the
following address and printed pri-
or to commissioning the product:
www.heidenhain.de
Documentation of
connected measu-
ring devices and
other peripherals
These documents are not included
in delivery. They are included with
the respective measuring devices
and peripherals