Polaris 2016 Victory Cross Country - Manual (Page 88)

86
Maintenance
Fuse Replacement
NOTICE: Use fuses with the recommended amperage to avoid damage to the electrical system.
Tip: Use the fuse puller provided in the tool kit to
remove a fuse.
1. Remove the right side cover.
2. Lift the release tab and slide the fuse
box upward to remove it from the
bracket. Release the tabs on each side of
the fuse box cover and remove the
cover.
3. Remove the damaged fuse and seat the
new fuse firmly in its place.
4. Reinstall the fuse box cover with the
double cut-out to the left (with print
readable from right side of motorcycle).
5. Reinstall the fuse box and the side
cover.
Fuse Recommendations
Fuse Application Fuse Size Fuse Application Fuse Size
Engine 15 amp Anti-Lock Brakes (ABS) 30 amp (2)
Fuel Pump/Ignition Coil 15 amp Reverse (if equipped) (on rear tire
debris flap) 25 amp
Lights 20 amp Accessory (under right side cover) 20 amp
Turn Signals/Horn 10 amp Radio (in fairing behind headlight) 25 amp
Ignition 10 amp 12-Volt Storage Compartment Outlet
(TOUR model) (under electrical cover
above battery) 10 amp
Chassis 20 amp
Fuse
Box
Accessory
Fuse
(if equipped)
Reverse Fuse (if equipped)
Radio Fuse (if equipped)
12-Volt Storage Compartment
Outlet (if equipped)
ABS Fuses
(if equipped)