Polaris 2016 Victory Cross Country - Manual (Page 29)

27
Instruments, Features and Controls
Left Handlebar Switches
Audio Switches (if equipped)
See page 109 for audio systems operation.
Mode Button
The mode button is located on the front side of the left handlebar
switch. Use the mode button to toggle through the modes of the
multi-function display. If “Err” displays while toggling through
the features, a system error has been logged. See page 24.
Use the mode button to set the display units to either standard or
metric units of measurement. See page 25.
Starter Interlock Switch
The starter interlock switch prevents the electric starter from
operating when the transmission is in gear and the clutch is
engaged (lever released). Read the engine starting procedures
beginning on page 44 before starting the engine.
WARNING! Never start the engine with the transmission in gear and the
clutch disengaged unless you are properly seated with the front brake
applied.
Lamp Switch Description
Emergency
Flasher Switch
(Hazard Switch) The emergency flasher switch activates and cancels the emergency
flashers. When the emergency flashers are active, all of the turn signals
flash. Press the top of the switch to activate the emergency flashers. Press
the bottom of the switch to cancel the flashers.
High Beam/Low
Beam Light
Switch The headlight high/low beam switch toggles the headlight between high
beam and low beam. To activate the high beam, press the upper portion of
the switch; to activate the low beam, press the lower portion of the switch.
Horn Button To sound the horn, press the horn button.
Turn Signal
Switch Move the switch to the left to activate the left turn signals. Move the switch
to the right to activate the right turn signals. A signal will deactivate
automatically when speed or distance reach predetermined levels. To
cancel a signal manually, move the switch to the center position and push
it inward.
Momentary Feature: Move the turn signal switch left or right and hold it in
that position for at least one second. The momentary feature will activate
and the signal will then cancel when the switch is released.
Flasher
(Hazard)
Switch
High/Low Light Switch
Horn Button Turn Signal Switch
Audio Switches
Mode Button
Clutch
Lever
Interlock
Switch