Polaris 2016 Victory Cross Country - Manual (Page 23)

21
Instruments, Features and Controls
Ignition Switch
The ignition key operates the ignition switch
and parking lights. The ignition switch
provides electrical power to the ignition, the
lighting system and all electrical switches and
buttons. Before starting the engine, read the
instructions for starting the engine. See page
44.
OFF
In the OFF position, all electrical circuits are
inactive and the ignition key can be removed.
Turn the ignition switch to the OFF position
and remove the ignition key when leaving the
motorcycle unattended.
ON
In the ON position, all electrical circuits are energized and the ignition key cannot be
removed. The headlamp, taillight, and instrument lights illuminate. The engine stop/run
switch must be in the RUN position to start the engine or activate the turn signals and other
electrical features.
PARK
In the PARK position, the taillight, indicator lights and license plate light illuminate. The
radio can be operated and the instrumentation is active. The emergency flashers can be
activated, and the ignition key can be removed. You must push the ignition key into the
switch while selecting the PARK position.
Seat Heater Switches
If equipped, the seat heater switches are located on the lower left edge of the seat.
Toggle Up: High
Toggle Down: Low
Toggle Center: Off
Off
On
Park
Driver’s
Seat Switch
Passenger’s
Seat Switch