Grass Valley Profile CD-ROM Drive - Manual (Page 57)

Verifying the Parallel Port Configuration
CD-ROM Instructions 57
Figure 17. CEX585 VGA-I/O board switch settings when used with the Pentium System
CPU board.
9. Reinstall the VGA-I/O board by aligning it with the connectors on the
motherboard and then pressing down firmly until the board is seated. The board
is properly seated when the top of the rear mounting bracket is resting on the
rear cabinet wall shelf. Reinstall the board mounting screw.
10. Reinstall the circuit board retainer.
11. Reinstall the top covers; install the rear cover first, then the front cover.
12. Reinstall the Video File Server in the rack and reconnect all cables previously
removed.
13. Reconnect the CD-ROM drive to the PDR100 parallel port and then, power up
the CD-ROM drive.
14. Power up the PDR100 and then logon as administrator.
15. Open File Manager (in Windows NT 3.51) or Explorer (in Windows 4.0) and
verify that the CD-ROM drive is listed as a drive.
1 2 3 4 5 6
OPEN
1 2 3 4 5 6
OPEN
9897-1
1 2 3 4 5 6
OPEN
1 2 3 4 5 6
OPEN
SW1 SW2
C E X 5 8 5