Determining the system cpu board hardware version – Grass Valley Profile CD-ROM Drive User Manual
Page 31

Determining the System CPU Board Hardware Version
CD-ROM Instructions
31
DTI Advanced BIOS Software Version 1.X
Copyright (C)1993-1994 Diversified Technology,Inc
All Rights Reserved (C) 1984-90, Award Software Inc
.
486 System CPU
board
CEX585 or
CEX 595
VGA-I/O
System CPU
board parallel
port installed.
(Connector may
be located in
another slot)
“Connecting the
CD-ROM Drive to the
PDR100” on page 42.
PhoenixBIOS Version 4.x
Copyright 1985-1995 Phoenix Technologies Ltd.
Copyright 1996, Diversified Technology, Inc.
All Rights Reserved.
ESP3520B Rls. 1.X
Press
Pentium System
CPU board
CEX585 or
CEX 595
VGA-I/O board
with parallel port
enabled.
“Connecting the
CD-ROM Drive to the
PDR100” on page 42.
PhoenixBIOS Version 4.x
Copyright 1985-1995 Phoenix Technologies Ltd.
Copyright 1996, Diversified Technology, Inc.
All Rights Reserved.
ESP3521 Rls. 1.X
Press
Pentium System
CPU board
CEX585 or
CEX 595
VGA-I/O board
with parallel port
enabled.
“Connecting the
CD-ROM Drive to the
PDR100” on page 42.
a. Press the keyboard
Pause
key to pause BIOS during bootup; press any other key to continue.
b. The VGA-I/O board parallel port (in slot J2) is disabled when used with the 486 System CPU board.
Table 2.
Procedure selection table (Continued)
Rear Panel View
BIOS Boot Screen Text
a
Hardware
Description
Starting Procedure
and Page Number
J1
J2
Parallel
Port
Power On Self Test Results
ESP2002 - Tektronix Release 1.X
J1
J2
J1
J2