Grass Valley Profile CD-ROM Drive - Manual (Page 29)

PDR100 Installation
CD-ROM Instructions 29
PDR100 Installation
This section contains procedures for installing the CD-ROM drive on PDR100
systems. Procedures are included for all PDR100 System CPU board hardware
versions. Which installation procedure you follow is determined by your System
CPU board hardware version.
Procedures in this section will help you:
- Determine your System CPU hardware version.
- Determine your starting point in the procedures depending on your
System CPU board hardware version.
- Install and test the CD-ROM drive.
Use following section to determine your System CPU board hardware version.
Determining the System CPU Board Hardware Version
You can determine the hardware version of your PDR100 by looking at the
PDR100 rear panel and observing the text displayed by the System CPU board
BIOS at power up, and then referring to Table 2.
To determine System CPU board hardware version:
1. Power On the SVGA Monitor connected to the PDR100.
2. Power On the PDR100, and then press the Pause key on keyboard when the
first screen of text appears.
3. Compare your BIOS boot screen text and PDR100 rear panel to those shown in
Table 2 to determine your starting procedure.