Grass Valley Profile CD-ROM Drive User Manual

Page 46

PDR100 Installation

CD-ROM Instructions

2. Open Control Panel by choosing

Start | Settings | Control Panel

3. Double-click

SCSI Adapters

4. Choose the

Drivers

tab and then click the

Add

button.

5. Choose

Have Disk

in the resulting dialog box and then insert the NT Driver

Diskette in the PDR100 floppy drive.

6. Ensure that

A:\

appears in the path text box, then click

7. Confirm that the

F.I.T. Parallel-Port Trans-Series NT Driver

is selected in the

SCSI

Adapter

list, then click

8. When prompted, change the path to

A:\

, then click

Continue.

9. Select

Yes

to restart the system and logon again as administrator.

NOTE: The message, “At least one service or driver failed during
start-up” displayed during start-up, may indicate a parallel port
problem. Refer to “PDR100 Troubleshooting” on page 49.

10. Choose

Start | Programs | Windows NT Explorer

and verify that the CD-ROM

drive is listed as a drive. If the CD-ROM drive doesn’t appear, refer to
“PDR100 Troubleshooting” on page 49 to help find the cause.

If the CD-ROM drive does appear, you have successfully installed the
CD-ROM drive for use with Windows NT 4.0 on your PDR100.

NOTE: The CD-ROM drive is not intended to be a permanent part of
the Profile system. Remove the CD-ROM drive when it is no longer
needed using the instructions in “Removing the CD-ROM Drive” on
page 47.