Grass Valley Profile CD-ROM Drive - Manual (Page 27)

Setting VGA-I/O Board Switches to Configure the Parallel Port
CD-ROM Instructions 27
Figure 5. CEX585 VGA-I/O board switch settings to enable parallel port
8. Reinstall the VGA-I/O board by aligning it with the connectors on the
motherboard and then pressing down firmly until the board is seated. The board
is properly seated when the top of the rear mounting bracket is resting on the
rear cabinet wall shelf. Reinstall the board mounting screw.
1 2 3 4 5 6
OPEN
1 2 3 4 5 6
OPEN
9897-1
1 2 3 4 5 6
OPEN
1 2 3 4 5 6
OPEN
SW1 SW2
C E X 5 8 5