Grass Valley PDR100 - Manual (Page 9)

PDR100 Installation ix
General Safety Summary
Review the following safety precautions to avoid injury and prevent
damage to this product or any products connected to it.
Only qualified personnel should perform service procedures.
While using this product, you may need to access other parts of the
system. Read the General Safety summary in other system manuals for
warnings and cautions related to operating the system.
Injury Precautions
Use Proper Power
Cord
To avoid fire hazard, use only the power cord specified for this product.
Ground the Product This product is grounded through the grounding conductor of the power
cord. To avoid electric shock, the grounding conductor must be
connected to earth ground. Before making connections to the input or
output terminals of the product, ensure that the product is properly
grounded.
Do Not Operate
Without Covers
To avoid electric shock or fire hazard, do not operate this product with
covers or panels removed.
Use Proper Fuse To avoid fire hazard, use only the fuse type and rating specified for this
product.
Do Not operate in
Wet/Damp
Conditions
To avoid electric shock, do not operate this product in wet or damp
conditions.
Do Not Operate in an
Explosive
Atmosphere
To avoid injury or fire hazard, do not operate this product in an explosive
atmosphere.
Avoid Exposed
Circuitry
To avoid injury, remove jewelry such as rings, watches, and other
metallic objects. Do not touch exposed connections and components
when power is present.
Product Damage Precautions
Use Proper Power
Source
Do not operate this product from a power source that applies more than
the voltage specified.
Provide Proper
Ventilation
To prevent product overheating, provide proper ventilation.
Do Not Operate With
Suspected Failures
If you suspect there is damage to this product, have it inspected by
qualified service personnel.