Grass Valley PDR100 - Manual (Page 63)

Analog Composite Output Circuit Board
PDR100 Installation 3-39
Analog Composite Output Circuit Board
The Analog Composite Output board is optional, and can occupy slot J11 or J12.
The Analog Composite Output circuit board has eight plug jumpers for test purposes
only. See Figure 3-36. In addition, this circuit board can output four system clocks (27
MHz) that are used as audio play-back clocks by the Audio I/O circuit board. System
Clock signals are output from J4, J5, J2, and J7.
Figure 3-36. Analog Composite Output Circuit Board Showing Plug Jumper Locations
Table 3-15. Analog Composite Output Plug Jumpers
Jumper Name Position Factory- Installed Operation
J11 Channel 1 Filter
Input Jumpered Jumpered DAC Output to Filter
Open Open
J12 Channel 2 Filter
Input Jumpered Jumpered DAC Output to Filter
Open Open
J16 Channel 3 Filter
Input Jumpered Jumpered DAC Output to Filter
Open Open
J13 Channel 4 Filter
Input Jumpered Jumpered DAC Output to Filter
Open Open
J11
J12
J16
J13
J3
J6
J15
J14
J4
J5
J2
J7