Grass Valley PDR100 - Manual (Page 26)

Chapter 3 Mechanical Installation
3-2 PDR100 Installation
Rack Dimensions
The PDR100 Disk Recorder, PDX103 Disk Expansion Unit, XLR100, and the
RS-422 Connector Panel are all shipped with hardware for rack mounting. The major
dimensions for all four units are shown in Figures 3-2, 3-3, 3-4, and 3-5. All four units
fit in a standard 19-inch (48.3 centimeter) rack. Spacing inside the front rails of the
rack must be at least 17
3 /
4
(45.1 centimeter) inches to allow clearance for the slide-out
tracks used for the PDR100 and the PDX103.
Figure 3-2. PDR100 Dimensions for Rack Mounting
19.000 in (48.3 cm)
25.463 in
(64.7 cm)
23.000 in
(58.4 cm)
16.750 in (42.5 cm)
8.720 in
(22.15 cm)