Grass Valley PDR100 - Manual (Page 65)

Component Analog Video Input Board
PDR100 Installation 3-41
Component Analog Video Input Board
The Component Analog Video (CAV) Input board is optional and can be installed in
any unused board slot that includes connection to the Video Bus (slots that include the
video bus are slots J5-J16). The CAV Input board must be installed close enough to
the audio card so that the audio clock cables will make connection. If your VDR has
an Analog Composite Output card, that card must be installed in slot 11 or 12.
The Component Analog Video (CAV) Input board accepts a single source of
component analog video input, which it converts to digital component video
conforming to SMPTE 125M (525-line) or EBU 3267 (625-line). The board then
transfers the digital video to the VDR’s video router bus.
Figure 3-38. Audio Clock Cabling from the CAV Input Board
9608-1