Grass Valley NewsEdit LT v.4.1 - Manual (Page 75)

Setting Up a Split Edit
Digital News Production 75
To Mark In and Out Points:
1. Move to the Mark In or Mark Out point in any of the following ways:
- Click the point on the Timeline where you want to place the points.
- Press the A , S , D , or F keys on the keyboard to jog through clips in 1-frame
or 10-frame increments.
- Press G to move back to the previous cutpoint.
- Press H to move forward to the next cutpoint.
2. Press I on the keyboard to Mark In and press O to Mark Out.
Setting Up a Split Edit
NewsEdit LT lets you set In and Out points to create a pre-defined split edit
from the Timeline Tool. To delay one of the tracks at the beginning of a clip,
set different In points for the video and audio, with one starting after the other.
You can also extend one track after the other at the end of a clip.
If your clips are already recorded to the Timeline, you can create a split edit
using the Cut Point Edit Tool. See “Changing Cut Points Between Adjacent
Clips” on page 103 for details.
To create a split edit:
1. Press 1 to select the Timeline Tool.
2. Press I on the keyboard to mark an In point for the video track.
3. Click the Show Audio Marks button.
Blue icons indicate audio mark in and out points.
4. Select a Mark In Point for the audio track.
The duration of the split appears in the Duration field.
5. Record your clip.