Grass Valley NewsEdit LT v.4.1 - Manual (Page 137)

Channel Routing
Digital News Production 137
Channel Routing
You can select where the audio tracks of your sequence output by specifying
the number of output channels and routing the channels.
For a two-channel system, the channels route by default as follows:
• If the pan control is in the left position, output routes to channel 1.
• If the pan control is in the right position, output routes to channel 2.
• If the pan control is in the center position, output routes to all channels.
To change the channel routing:
• Click the arrow next to the Channel Routing field for each audio track you
want to change and select a new setting.
You can select from 1+2 , 3+4 , or All . If you have more than four audio tracks
in your sequence, click the Bank Select arrow to move to Bank 2 and then
make your changes for tracks A5 through A8.
Select the
channels
for output
Select the
bank
for your
audio tracks