Grass Valley Kayak HD v.6.9.3 - Manual (Page 547)

Kayak — User Manual 547
Configuration Menus
Transition Abort (Enable/Disable):
When another program source is selected a currently running transition
will be aborted and the selected source is taken as program. Only available
in non-layered mode.
FTB Cancel (Enable/Disable):
When another program source is selected an active fade-to-black will be
instantly cancelled, so that the image with the selected source is visible on
the stages program output. This is available only in non-layered mode.
Auto Transition Abort Inhibit:
In On state, a Auto Transition can not stopped by pressing the Auto button
again.
Key Drop ...:
The selected keys will be dropped, i.e. cutout, when another program
source is selected. Mainly used for DSKs.
Flexi Key
FlexiKey can also be configured in menu Config - E-Box - M/E in the same way
as the Cleanfeed Configuration.
1. Select the mixing level P/P, M/E1, etc .
2. Select the parameter and modify it by using the Modify button ( Figure ).