Grass Valley Kayak HD v.6.9.3 - Manual (Page 202)

202 Kayak — User Manual
Section 5 — Kayak Menu Summaries
In column Type the selected Transition Type of the component is shown. A
selected (blue bar) component is visible in the graphs and can be adjusted
independent of whether it is switched, visible, or neither.
Used RAM Recorder Channels
If RAM recorder is selected as the function for Misc 1 and 2, then the Main
menu‘s Misc 1 and 2 function as the transition component and the channels
are colored and highlighted. In addition the lengths of the clip will be
shown in frames.
Note Currently this is only selectable in the Sidepanel.
Arrow buttons
Selects an item in the component table.
Show/Hide
Show or hide the selected item in the graphs in order to improve the clarity.
Offset On
Activates the Offset Transition settings for use during the next MultiMix
transition. Offset Transition can be activated in the M/E Main menu also.
Refer
Section 7-Sidepanel Menu Summaries — M/E Main Menu .
Copy Offsets
If offset transition is switched off, a second parameter set of offset transi-
tions appears. You can modify this set when offset transition is switched
off. You can also make it the active one by using the Copy Offset button.
% / Frames
Toggles the adjusting units between percentage (%) and Frames.
Reverse / Normal Reverse
The Normal Reverse button determines the transition pattern direction. If
this button is activated, the transition direction is changed every time the
fader is in final position or when the transition is completed.
If you wish to change the preset transition direction, press the Reverse
button.