Pattern mix, To create a pattern mix – Grass Valley Kayak HD v.6.9.3 User Manual

Page 386

386

Kayak — User Manual

Section 6 — System Operation

Pattern Mix

The Kayak system can combine the complex wipe pattern generators (

Wipe1

and

Wipe2

), to create a wide variety of customized wipes.

To Create a Pattern Mix

Double press the

Wipe

button in the Transition subpanel on the Main

panel. This selects

Wipe

as the next transition type and also opens the

Wipes menu with Wipe1 delegated for control.

Select the Wipe1 pattern to be used by touching the

Pattern

data pad, and

then selecting one of the displayed patterns.

Touch the

Mix, Ratio, etc.

data pad.

Press the

Trans PVW

button in the Transition subpanel, and move the

lever arm part way. This will display the Wipe1 pattern on preview.

Set Wipe delegation to Wipe2 and select the desired pattern to be mixed
with Wipe1.

You can select the type of pattern mix with the Mix type buttons (

Mix,

NAM +, NAM –

). The

NAM

buttons are used for

And

pattern mixing.

You can also adjust the amount each wipe pattern contributes to the mix
with the

Ratio

control digipot. At 50%, each pattern contributes equally.

At 25%, the other pattern contributes only 25% to the final pattern.

Note

It is always Wipe1 which is adjusted for pattern mix, i.e. you are mixing
Wipe1 with Wipe2. Not Wipe2 with Wipe1.

This manual is related to the following products: