Grass Valley Kameleon HD Multi-Function Modules v.2.1.0 - Manual (Page 40)

40 Kameleon HD Instruction Manual
Initial Configuration Process Overview
KAM-HDD-PA/KAM-HDD-FS/KAM-HDD I/O Config Web Pages
The I/O Config pages for the possible KAM-HDD-PA, KAM-HDD-FS, and
KAM-HDD configurations are illustrated in the following figures:
• KAM-HDD-PA/KAM-HDD-FS/KAM-HDD with HD 59.94 or HD 50
Input, BNCs J3 and J4 set for SD Outputs – refer to
Figure 24 . For a
graphical block diagram, refer to Figure 42 on page 58
(KAM-HDD-PA), Figure 46 on page 61 (KAM-HDD-FS), or Figure 50
on page 64 (KAM-HDD).
• KAM-HDD-PA/KAM-HDD-FS/KAM-HDD with HD 59.94 or HD 50
Input, BNCs J3 and J4 set for HD Outputs – refer to
Figure 25 on
page 41 . For a graphical block diagram, refer to Figure 43 on page 59
(KAM-HDD-PA), Figure 47 on page 62 (KAM-HDD-FS), or Figure 51
on page 65 (KAM-HDD).
• KAM-HDD-PA/KAM-HDD-FS/KAM-HDD with HD 24 Input (no
down conversion) – refer to
Figure 26 on page 41 . For a graphical block
diagram, refer to Figure 44 on page 59 (KAM-HDD-PA), Figure 48 on
page 62 (KAM-HDD-FS), or Figure 52 on page 65 (KAM-HDD).
• KAM-HDD-PA/KAM-HDD-FS/KAM-HDD with SD Input – refer to
Figure 27 on page 42 . For a graphical block diagram, refer to Figure 45
on page 60 (KAM-HDD-PA), Figure 49 on page 63 (KAM-HDD-FS), or
Figure 53 on page 66 (KAM-HDD).
Figure 24. KAM-HDD/-PA/-FS I/O Config – HD 59.94 or HD 50 In (J3/J4 SD)