Grass Valley Kameleon HD Multi-Function Modules v.2.1.0 User Manual
Page 100
100
Kameleon HD Instruction Manual
Initial Configuration Process Overview
6.
The NetConfig Load Software window will open showing the software
files available (
These device types and versions represent the .sw2 and .fld files loaded
in the NetConfig main directory and the modular subdirectory. These
files must be present on the PC running NetConfig for them to appear
in the Device Type list.
7.
Select the Device Type you wish to update. In the example in
,
the KAM-HD module Device Type has been selected and will be
highlighted. All of the modules of this type accessible on the network
will appear in the window on the right under the
Client Name
heading.
The current software loaded on each module will be listed as well as the
IP address and other information for the module client.
8.
Check the corresponding
Client Name
boxes to upgrade the modules or
use the
Select All
button to update all modules of this type present on the
network.
9.
Press the
Load
button to perform the update to all the selected modules.
10.
Once the loading is complete, select the
Refresh
button to make sure all
selected modules have updated to the correct software version which
will be reported in the window.
Figure 77. NetConfig Load Software Window
For more information on using NetConfig, refer to the NetConfig Net-
working Application Instruction Manual which is included with the Net-
Config option, available on the Thomson Grass Valley web site, and may
also be present in the NetConfig directory from other NetConfig installa-
tions (Newton Control Panel installation is one example).