Grass Valley Kameleon HD Multi-Function Modules v.2.1.0 - Manual (Page 32)

32 Kameleon HD Instruction Manual
Initial Configuration Process Overview
Kameleon HD Links and Web Pages
The 2000 GUI provides the following links and web pages for the KAM-HD
modules:
• Status – reports input, reference, and frame bus status and module
information (
page 35 ),
• I/O Config – shows a graphic representation of inputs and outputs to
the module and allows naming of the input and output signals
(
page 37 ),
• System Config – provides output timing selection, input video type
select, video rate select, video processor enable, color bars test signal
enable, a split screen control, and an advanced view for VBI configura-
tion (
page 43 ),
• Functional View – shows a block diagram of the module with links to
each module configuration page (
page 56 ),
• Module Configuration pages for setting up the module ( page 67 ),
• E-MEM® – provides Standard and Advanced E-MEM for Learn and
Recall functions for up to 5 E-MEM registers, and Recall of Factory set-
tings and names (
page 89 ),
• Slot Config – provides a Locate Module function, Slot Identification
fields, Slot Memory, and links to the Frame Health and SNMP reporting
on the 2000NET module (
page 94 ), and
• Software Update – allows updating of software from a CD-ROM or the
web site (
page 98 ).
The KAM-HD-FS module links are shown in Figure 17 for available web
pages when an HD input type is selected (left) or an SD input (right).
Figure 17. KAM-HD-FS Web Page Links