Grass Valley Kameleon HD Multi-Function Modules v.2.1.0 - Manual (Page 30)

30 Kameleon HD Instruction Manual
Configuration and Adjustments
Status LED icon
The Status LED icon reports communication status for the frame slot and is
a link to the module Status web page where Warnings and Faults are dis-
played. LED colors indicate:
• Green = Pass – no problems detected
• Yellow = Configuration error warning
• Red = Fault condition detected
• Model and Description are read-only generated by the module.
• Frame Location is defined on the 2000 Series Kameleon Frame Configura-
tion web page.
• Slot number reports the module’s location in the frame.
• Input Video Standard reports the input video type and rate selected on the
System Config web page.
• Input Video reports the status of the video input to the module.
• Output Timing Source reports the output timing source (Frame Reference
or Input) chosen on the System Config web page.
• Split Screen status is reported ( Enabled or Disabled ) as set on the System
Config, Color Correction, or HD and SD Video Proc Amp web pages.
• Last Recalled E-MEM reports the last E-MEM configuration recalled.
• Down Converter Output Line Rate (valid only on HDD modules with
HD 59.94 or HD 50 input type, not applicable on the KAM-HD-FS
module) reports the line rate of the Down Converter output.