Grass Valley Kameleon HD Multi-Function Modules v.2.1.0 - Manual (Page 10)

10 Kameleon HD Instruction Manual
Module Overviews
KAM-HDD-FS HD/SD Frame Sync with Down Converter
The KAM-HDD-FS module offers HD and SD signal video processing and
frame synchronization with video proc amps plus color correction and
down conversion. The required rear module for use with this module is the
dual-height KAM-HDD-R Rear.
The module can be configured in a number of different ways as follows:
• One HD input (HD 59.94 or HD 50) with two HD outputs, two down
converted SD outputs, and two encoded composite outputs as shown
in the Functional View block diagram in
Figure 46 on page 61 .
• One HD input with four HD outputs and two down converted encoded
composite outputs as shown in the Functional View block diagram in
Figure 47 on page 62 .
• One HD input (HD 24 – no down conversion) with four HD outputs as
shown in the Functional View block diagram in
Figure 48 on page 62 .
• One SD input with four SD outputs and two encoded composite
outputs as shown in the Functional View block diagram in
Figure 49 on
page 63 .
KAM-HDD HD/SD with Monitoring Down Converter
The KAM-HDD module offers HD or SD down conversion with composite
outputs. This module can use the single height KAM-HD-R Rear module.
The module can be configured in the following different ways:
• One HD input (HD 59.94 or HD 50) with two HD outputs, two down
converted SD outputs, and two encoded composite outputs as shown
in the Functional View block diagram in
Figure 50 on page 64 .
• One HD input with four HD outputs and two down converted encoded
composite outputs as shown in the Functional View block diagram in
Figure 51 on page 65 .
• One HD input (HD 24 – no down conversion) with four HD outputs as
shown in the Functional View block diagram in
Figure 52 on page 65 .
• One SD input with four SD outputs and two encoded composite
outputs as shown in the Functional View block diagram in
Figure 53 on
page 66 .