Type must be selected as explained on the, Input/output configuration web, Connect balanced or unbalanced – Grass Valley KAM-ENC-2AES v.4.0.1 User Manual
Page 28: Unbalanced outputs must be made on the, The module and allows naming of each input, Input/output configuration web page
28
KAM-ENC-2AES Instruction Manual
KAM-ENC-2AES Links and Web Pages
Input/Output Configuration Web Page
Use the I/O Config web page to:
•
View a graphical overview of the currently installed rear module con-
nectors,
•
See signal status of inputs,
•
Set the AES audio input and output connector types with the
Balanced
or
Unbalanced
radio buttons, and
•
Assign easily recognized signal names that will help later in the config-
uration process.
illustrates the I/O Config web page for the KAM-AES-R passive
rear module required for the KAM-ENC-2AES front module set for unbal-
anced AES/EBU audio inputs and outputs. Audio inputs and outputs can
be different connector types.
Note
Only the selected AES outputs are valid. Unconfigured AES outputs are
invalid and should not be used.
Figure 12. KAM-AES-R Rear Module I/O Config Web Page (Unbalanced Audio)
Use
this
link
Select AES output type
Select AES input type