Grass Valley SiteConfig Migration Instructions - Manual (Page 56)

Configure deployment groups and
prepare for deployment
NOTE: There might be a newer version of this document available. Check your
product's release notes and the Grass Valley website at www.grassvalley.com/docs
for references to an updated version that contains additional important information.
Use the topics in this section as appropriate for your system to prepare devices for
software deployment.
NOTE: Refer to the migration checklist for your system type to determine the
appropriate topics and other system-specific information.
Related Links
Type I migration checklist on page 8
Type II migration checklist on page 9
Type III migration checklist on page 11
Configuring deployment groups
Prerequisites for this procedure are as follows:
• The device is assigned in the SiteConfig system description and network
connectivity is present.
1. In the Software Deployment | Deployment Groups tree view, right-click the top node
and select Add Deployment Group .
A deployment group appears in the tree view.
2. Right-click the deployment group, select Rename , and enter a name for the
deployment group.
3. Right-click the deployment group and select Add Target Device .
The Add Target Device(s) wizard opens.
56 SiteConfig Migration Instructions 02 July 2009
Configure deployment groups and prepare for deployment