Evaluate and prepare devices for siteconfig, Create record of software installed on devices – Grass Valley SiteConfig Migration Instructions User Manual
Page 28
Evaluate and prepare devices for
SiteConfig
NOTE: There might be a newer version of this document available. Check your
product's release notes and the Grass Valley website at www.grassvalley.com/docs
for references to an updated version that contains additional important information.
Use the following topics to answer the following questions for each of your system
devices:
•
Is SiteConfig support software installed?
•
Are network cables connected and settings configured as SiteConfig expects?
•
Is software installed and configured as specified by SiteConfig software roles?
Then, if necessary, install support software and make other preparations so that your
devices are ready for SiteConfig discovery and configuration.
NOTE: Refer to the migration checklist for your system type to determine the
appropriate topics and other system-specific information.
Related Links
on page 11
Create record of software installed on devices
if you have not already done so, create a document on which you can keep track of
the software installed on each of your system devices. This is especially helpful for
Aurora product devices. The following table is an example of this type of document.
As you evaluate each of your system devices, verify the software currently installed
on the device and fill in the table. Then, as you proceed with subsequent tasks and
assign software roles to devices in SiteConfig, you can refer to your table and make
sure you are assigning software roles correctly.
FTP-1
HDK2-1
FSM-1
ING-1
DSM-1
EDIT-1
CONF-1
HD-1, 2, 3
SVR-1
Software
X
MF Server
X
+ K2 MDI
X
+ News MDI
X
+ NTFS
X
+ FlashNET MDI
X
+ Proxy MDI
28
SiteConfig Migration Instructions
02 July 2009
Evaluate and prepare devices for SiteConfig