Grass Valley SiteConfig Migration Instructions - Manual (Page 49)

If this is not the case, you might have the control network cable connected to
the wrong interface port.
• Configure the control network interface first before configuring any of the other
interfaces.
• After you have successfully configured the control network interface, return to
this step to configure each remaining interface.
2. In the Interfaces list view, check the icon for the interface you are configuring.
If the icon has a red stop sign overlay, it indicates that current settings and
planned settings do not match or that there is some other problem. Hover over
the icon to read a tooltip with information about the problem.
3. In the Interfaces list view, right-click the interface you are configuring and select
Edit .
The Managed Network Interface Details dialog box opens.
NOTE: Do not click OK if planned settings (red text) are displayed.
4. Identify the interface on the discovered device that you are configuring.
• Identify Ethernet LAN adapters by their "Description" name. This is the
Windows connection name. SiteConfig reads this name from the device and
02 July 2009 SiteConfig Migration Instructions 49
Discover and assign devices