Grass Valley SiteConfig Migration Instructions - Manual (Page 20)

3. Configure the settings for the network as follows:
For control network Setting...
Ethernet is required Type
Control is required Usage
None is required. This is true even on a redundant K2 SAN.
(Only the iSCSI network is redundant on a redundant K2 SAN.) Redundancy
Control is recommended Name
Unselected is required Exclude from
Host Files
Selected is required Managed
The first (lowest) IP address in the range of IP addresses
managed by SiteConfig. Required. Base IP Address
The number of IP addresses in the range managed by SiteConfig.
Required. Number of
Addresses
The network's subnet mask. Required. Subnet Mask
Additional network settings managed by SiteConfig. Allowed. Gateway IP
Address
20 SiteConfig Migration Instructions 02 July 2009
Start system description