Grass Valley SiteConfig Migration Instructions - Manual (Page 39)

SiteConfig also generates a planned tab if settings were modified outside of SiteConfig.
A red icon overlay with tooltip provides contextual information.
Viewing device interfaces
1. In the Network Configuration | Networks tree view, select any node.
The devices under that node are displayed in the device list view and the
interfaces on the devices are displayed in the interface list view.
2. To view interfaces that do not use Internet Protocol (IP), such as Fibre Channel
interfaces, as well as interfaces that do use IP, select Show non-IP Interfaces .
3. To view only interfaces that use IP, deselect Show non-IP Interfaces .
4. To view only the interfaces on a single device, select the device in the tree view
or in the device list view.
About IP configuration of network interfaces on devices
You can perform IP configuration of network interfaces when working with a
placeholder device prior to discovery. When you add a device and choose a particular
model, the model defines the number, type and usage characteristics of network
interfaces to expect on such a device.
You can view and edit each network interface and set up IP configuration selecting
an appropriate IP from the network to which each interface connects. The process for
editing IP configuration varies, depending on the device's phase.
02 July 2009 SiteConfig Migration Instructions 39
Develop system description